The CASE 821F wheel loader offers faster acceleration, quicker cycle times, and higher travel speeds while delivering as much as 20% better fuel economy. The F Series wheel loaders use SCR technology to meet Tier 4 emissions standards while also providing more powerful and responsive engines. With full climate control, an award-winning joystick steering option, and an available two-level control system, CASE provides you with a comfortable and efficient cab.
Ideal For:
CASE 821F FEATURES
Productivity
A powerful-and-efficient 6.7-liter Tier 4 Final engine delivers best-in-class horsepower, quick throttle response and massive torque. Operators can match engine output to the task at hand with four programmable power modes. An optional five-speed transmission with lock-up torque converter improves acceleration and hill climbing for faster cycle times and also includes our exclusive POWERINCH™ declutching feature, which provides accuracy and control when operating in tight environments such as truck loading. This 821F is also available with XR (Extended Reach) linkage for a greater dump height and versatility.
Fuel Efficiency
Because of idle-heavy applications and variable power demands, SCR (Selective Catalytic Reduction) Tier 4 Final technology is a fitting choice for a mid-sized wheel loader. As an after-treatment system, SCR lets the engine run at peak performance, which provides faster throttle response while also maintaining lower temperatures and delivering up to 20% better fuel efficiency over other solutions. Economy is optimized even further with auto-idle and auto-shutdown features. Plus, SCR is simple. No Diesel Particulate Filter regeneration or replacement. No extra downtime. No extreme temperature spikes. Just pour a little DEF (Diesel Exhaust Fluid) when refueling and go.
Comfort and Visibility
The 821F offers one of the industry’s quietest and most spacious cabs with class-leading visibility thanks to floor-to-ceiling windows, a low rear hood and an optional rear-view camera. Our award-winning joystick steering (another CASE exclusive) helps reduce operator fatigue while an ISO-mount cab design, dual air filtration system and optional heated, air-ride seat help provide daylong comfort.
Serviceability
Routine maintenance is a breeze thanks to the mid-mounted cooling cube, ground-level fluid gauges and an electric lift, tilt-up rear hood that provides complete engine access.
CASE 821F STANDARD EQUIPMENT
Operator Environment
- ROPS cab w/ heat
- Key start
- Articulated power steering w/ tilt column
- Fully adjustable, suspension seat
- Foot throttle
- Single lever loader control w/ wrist rest
- Cup holder
- Coat hook
- 1 Interior rearview mirror
- 2 in (51 mm) retractable seat belt
- Storage tray behind seat
- Cooled lunch box
- Single brake pedal
- F/N/R shuttle switch
- External rearview mirrors
- Lock box
- Pressurized air filtering
- Anti-glare window strip
- Defroster
- Side window, partial/fully open
- Dome light
- Wipers, rear and intermittent front
- Windshield washers, front and rear
- Rubber floor mat
- Electronic Information Center
- Horn
- LCD screen: Hour meter, Time, FNR indicator, Trip computer, Differential lock, Engine speed, Automatic transmission indicator, DeClutch indicator, Fuel consumption, Engine diagnostics, Error reporting, Travel speed, Gear selection, Engine mode indicator, Transmission diagnostics, DEF – Diesel Exhaust Fluid gauge, Diff lock* Audible/Visual alarms:
- Warning lights: Four-way flashers and turn signals Brake pressure, Lamp/high beam indication ,Grid heater* NOTE: *If equipped w/ option
- Caution alarm
- Critical alarm
- Backup alarm
- NOTE: *If equipped w/ option
Engine
- FPT F4HFE613
- Tier 4 Final Certified
- Selectable work modes: Maximum power, Auto power, Standard power, Economy power
- Turbocharger
- Charge air cooling
- Automatic fan belt tensioner
- Integral engine oil cooling
- Fuel filter with water trap
- Dual-element air cleaner
- Hydraulic-driven cooling fan
- Air-cooled radiator
- Mid-mounted cooling module
- Common rail electronic fuel injection
Loader
- Z-Bar loader linkage
- Single control for lift and tilt
- Positive hold float
- Automatic return-to-dig
- Automatic height control
- Automatic return-to-travel
- Brake pedal transmission disconnect
- Bucket position indicator on bucket
Hydraulics
- 2-function loader valve with joystick control
- Low-effort steering
- Hydraulic driven cooling fan
- Diagnostic quick couplers
- Split flange hydraulic connections – 1 in or greater
Electrical
- Alternator and voltage regulator
- Electrical disconnect
- 120 amp alternator
- (2) 700 CCA 12-volt batteries
- Lights: 2 Front driving headlights – high/low beam, 2 Front flood, 2 LED stop and tail lights * 2 Rear flood, Front and rear turn signal/flash
- Key start/stop switch
- Backup alarm
- Centrally located fuse box with all electrical circuits protected
- Remote jump start receptacle
Other
- Electric hood lift
- Front and rear fenders, partial coverage
- Heavy counterweight
- Drawbar hitch
- Articulation locking bar
- Lift arm locking bar
- Lift and tie-down points – front/rear
- Remote drain points
- Grouped remote-mounted ecology drains:
- Engine oil
- Engine coolant
- Hydraulic oil
Telematics
- CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription
Drivetrain
- 4-wheel drive
- 4F/3R Selectable autoshift/manual shift transmission
- Electronic Control Module – programmable, computer controlled proportional shifting with programmable gear selection
- Onboard diagnostics
- Single lever electronic shift control
- F/N/R switch in loader control handle
- Downshift button
- Torque converter
- Limited-slip differentials – Z-Bar
- Heavy-duty axles – XR: Larger size rear axle with automatic hydraulically-actuated differential lock on front axle, open differential on rear axle.Recommended for applications on hard surfaces or with solid tires.
- Outboard planetary axles
- Transmission oil cooler
- Brake pedal transmission disconnect – declutch
- Hydraulic wet disc brakes
- Spring-applied hydraulic release parking brake
- Limp-Home Mode
- Greasable rear axle trunnion
- 3-piece rims
CASE 821F OPTIONAL EQUIPMENT
Operator Environment
- Heated cloth-covered air suspension seat
- Cloth mechanical suspension seat
- Headrest
- 3 in (76 mm) retractable seat belt
- Sound Shield noise suppression package
- Cab with heater only – no AC
- Radio-ready – 12 or 24-volt with auxiliary power – 12-volt
- AM/FM stereo radio
- Cab convenience package: ashtray, 24V cigar lighter and cell phone holder
- Rotating beacon
- Right hand brake pedal
- External rearview mirrors
- External rearview mirrors, heated
- In-cab accessory mount – no rear view camera
- Rear view camera with accessory mount
- Extra front-facing work lights
Hydraulics
- Auxiliary hydraulics
- Ride Control
- Secondary steering
- Joystick steering with and without secondary steering
- 2-function loader valve with single access control
- 3-function loader valve with 3 lever control or with joystick plus lever
- 4-function loader valve with joystick and 2 lever control
Drivetrain
- 5F/3R Autoshift/manual shift transmission, lockup torque converter, PowerInch de-clutch
- Heavy-duty axles – Z-Bar: Larger size rear axle with automatic hydraulically-actuated differential lock on front axle, open differential on rear axle. Recommended for applications on hard surfaces or with solid tires.
- Cold weather package:
- Heavy-duty (2) 950 CCA 12V batteries
- Grid heater
- Fuel heater
- Hydraulic oil cooler bypass
- Low temperature hydraulic oil
- Fast-warm hydraulic valve
Loader
- XR extended reach version
- Attachment auxiliary hydraulics
- Coupler systems – JRB or ACS compatible
- Buckets – see pages 4 through 8
- 4 – 1 clamp buckets
- Forks
Advanced Engine Air Filtration
- Variable speed hydraulic reversing fan
- Full view air pre-cleaner
- Sy-Klone® ejective air pre-cleaner
Tires
- 23.5 x 25 L2 bias – dirt/traction
- 23.5 x 25 L3 bias – rock
- 23.5 R25 L2 radial – dirt/traction
- 23.5 R25 L3 radial – rock
- 23.5 R25 radial Michelin SnoPlus
- Spare wheels and tires
- Axle oscillation stops
Other
- Additional RH steps and platform with standard or wide fenders
- Side guards for rear frame
- Tool box – ground level access
- Light counterweight – Z-Bar
- Fire extinguisher
- License plate bracket
- 12.4 mph (20 kph) maximum speed control
- Special paint
- Skid plate and transmission
INTERESTED IN LEARNING MORE ABOUT THE CASE 821F?
Our experienced staff are ready to discuss your new equipment needs. Reach out below to discuss a quote request!