With fast lifting speeds, roading speeds of up to 24 mph (38.6 km/h), lifting capacities of up to 8,000 lbs and a slew of unique features that keep loads level and operators comfortable, the high-performance, Tier 4 Final 588H forklift truly does raise the bar. Without a disruptive third mast, our wide-channel, dual-mast design gives it unmatched visibility. We’ve also maintained a low-profile hood with our Tier 4 Final engine for a clear view behind the machine. Even at top lift heights, a perforated steel canopy gives operators clear vision without the neck-straining need to lean forward.
Ideal For:
- GOVERNMENT / MUNICIPALITIES
- AGRICULTURE
- LANDSCAPING
- NON-RESIDENTIAL CONSTRUCTION
- RENTAL
- RESIDENTIAL CONSTRUCTION
- UTILITIES
CASE 588H FEATURES
Productivity
The CASE 586H and 588H increase productivity and efficiency with industry-leading lift speed and dependable, high-performing lift capacities. These rough terrain forklifts are able to operate in a variety of terrains with the optional 4 four-wheel drive and standard differential lock. No need to worry about your load, CASE offers maximum travel capabilities with their 60° of mast tilt and optional load control. If operating in tight areas is a concern, the 588H features a narrow zero-tail swing design, meaning if the rear tires clear it, the rear of the machine will as well. CASE rough terrain forklifts feature an industry standard ITA class 3 carriage and forks allowing a wide range of aftermarket attachments.
Fuel Efficiency
These forklifts feature a simple, cost-effective Tier 4 Final solution. The 74 horsepower, 3.4 liter FPT engine uses a Diesel Oxidation Catalyst (DOC) to deliver a minimum of 5% better fuel efficiency than our previous models and faster response times while meeting current environmental standards.
Comfort and Visibility
Without a disruptive third mast, our wide-channel, dual-mast design gives the H Series unmatched visibility. A narrow operating console further help increase front view so operators can confidently secure materials and a low-profile hood provides a clear view behind the machine. The large operating platform provides ample room for any operator. Add the optional deluxe suspension and load control for a comfortable ride on any terrain.
Serviceability
From tool-free swing-out access doors and spin-on filters, to ground-level site gauges and grouped service points, you can do daily maintenance in a matter of minutes. It’s the easiest way to help you get the most performance and longest life out of your machine. Axles are also easily serviced without complete disassembly for easy upkeep.
CASE 588H STANDARD EQUIPMENT
ENGINE
- FPT 3.4 L Diesel
- Cooled EGR
- Diesel Oxidation Catalyst
- Full flow engine oil filter
- Air cleaner: Replaceable dry type with radial seal
- Particulate filter
- Radiator with de-aeration bottle
- Antifreeze to -34°F (-37°C)
- Foot throttle
- Self adjusting belt
MAST
- 15 ft Std. Mast 2,468 lb (1 120 kg)
- 22 ft Std. Mast 3,183 lb (1 444 kg
HYDRAULICS
- Gear pump – 24 gal/min @ 3,000 psi (91 L/min @ 207 bar)
- Heavy-duty hydraulic oil cooler
- 7 micron, spin-on oil filter
OPERATOR ENVIRONMENT
- ROPS/FOPS certified protective canopy
- 2 halogen headlights
- 2 rear halogen work lights
- Wide walk through platform
- Vinyl seat
- 2 in (51 mm) seat belt
- Molded front fenders
- Gauges: Hour meter, Engine RPM, Engine coolant temperature, Transmission oil temperature, Job timer, Fuel level
- Warning lights: Air cleaner restriction, Alternator, Cold start, Engine oil pressure, Hydraulic oil filter bypass, Parking brake engagement, Engine coolant temp, Battery voltage
- Audible alarms: Coolant temperature, Engine oil pressure, Parking brake engagement, Converter oil temperature, Backup, Horn
DRIVETRAIN
- Front axle, as selected:
- 2/4WD heavy-duty outboard planetary drive, with 19.5 L x 24 tires
- Rear axle: 2WD heavy-duty front axle with 12 L x 16.5 tires 4WD heavy-duty mechanically driven rear axle, with 12 L x 16.5 tires
- 4F-4R Power Shuttle Synchromesh Transmission
- Torque converter
- On-the-Go electric 4WD control
- Electric F/R shuttle control
- Electric differential lock control, with push-button activation
- Park brake, spring applied, hydraulic release
OTHER
- Swing out side panel engine access
- Front/rear tie downs
- Reflective logos
- Canopy only: 2 front driving lights, 2 rear halogen work lights
CASE 588H OPTIONAL EQUIPMENT
ENGINE
- Cold Weather Starting Aid: Dual 12 Volt batteries with glow plugs
- Block heater
- Master disconnect switch and remote Jump start terminals
- Pre-Cleaner
MAST/FORKS/CARRIAGE
- 15 ft Standard Mast
- 22 ft Standard Mast
- 16 ft Freelift Mast
- Power Positioning Mast and Forks
- 48 in Pallet Forks, ITA Class 3 hook type
- 48 in Pallet Forks, shaft type
- 60 in Backrest
HYDRAULICS
- Front auxiliary hydraulics
OPERATOR ENVIRONMENT
- Load control
- Deluxe suspension seat, with lumbar support and high adjustments
OTHER
- Slow moving vehicle emblem
- Special paint
- Lock-up covers
- Light Package: Turn signals, Hazard warning, Combination flashers
- Tool box
- Sitewatch Telematics
INTERESTED IN LEARNING MORE
ABOUT THE CASE 588H?
Our experienced staff are ready to discuss your new equipment needs. Reach out below to discuss a quote request!