Get ready to experience the next generation of power, performance, reliability and comfort with the renowned CASE F Series wheel loaders. With the industry’s most impressive gains in fuel economy, the CASE 721F wheel loader offers the superior power and performance to tackle jobs of any size. The use of SCR technology helps the 721F achieve Tier 4 certification while providing powerful, simple and efficient machines.
Ideal For:
CASE 721F FEATURES
Productivity
Best-in-class horsepower, quick throttle response and massive torque are delivered by the reliable, CASE 6.7-liter Tier 4 Final engine. And with four programmable power modes, you’re able to match engine output to the task at hand. Roading speed, acceleration and cycle times are faster with the optional five-speed transmission with lockup torque converter. Included with the optional five-speed is our exclusive POWERINCH™ declutching feature, which provides accuracy and control when operating in tight environments such as truck loading. This unit is also available with XT (Tool Carrier) or XR (extended reach) linkage and specialty configurations for even greater versatility and productivity.
Fuel Efficiency
Because of their idle-heavy applications and variable power demands, SCR (Selective Catalytic Reduction) Tier 4 Final technology is a fitting choice for this mid-sized wheel loader. As an after-treatment system, SCR lets the engine run at peak performance, which provides faster throttle response while also maintaining lower temperatures and delivering up to 20% better fuel efficiency over other solutions. Best yet, SCR is simple. No Diesel Particulate Filter regeneration or replacement. No extra downtime. No extreme temperature spikes. Just top off your DEF (Diesel Exhaust Fluid) and go. And fuel savings can be furthered with the standard engine shutdown feature — allowing the owner to limit engine idle time. An optional Efficiency Package provides additional fuel savings with features such as five-speed lock-up transmission, axles with auto locking differential and advanced system programming.
Comfort and Visibility
The 721F offers one of the industry’s quietest and most spacious cabs with class-leading visibility thanks to floor-to-ceiling windows and a low rear hood. Visibility can be enhanced even more with the optional rear-view camera. And an ISO-mount design, dual air filtration system and optional heated, air-ride seat help provide operators daylong comfort. Our award-winning joystick steering (another CASE exclusive) also helps reduce operator fatigue.
Serviceability
Tire wear on hard surfaces, along with applications using solid foam-filled tires can be reduced with the optional heavy duty axles with hydraulically locking front differentials. Routine cleaning is a breeze due to the cooling module position that limits debris buildup. And daily maintenance is made easy thanks to ground-level service checks, eye-level fluid gauges and an electronically lifted rear hood that provides complete engine access.
CASE 721F STANDARD EQUIPMENT
Operator Environment
- ROPS cab w/ heat
- Key start
- Articulated power steering w/ tilt column
- Fully adjustable, suspension seat
- Foot throttle
- Single lever loader control w/ wrist rest
- Cup holder
- Coat hook
- 1 Interior rearview mirror
- 2 in (51 mm) retractable seat belt
- Storage tray behind seat
- Cooled lunch box
- Single brake pedal
- F/N/R shuttle switch
- External rearview mirrors
- Lock box
- Pressurized air filtering
- Anti-glare window strip
- Defroster
- Side window, partial/fully open
- Dome light
- Wipers, rear and intermittent front
- Windshield washers, front and rear
- Rubber floor mat
- Electronic Information Center
- Horn
- LCD screen: Hour meter, Time, FNR indicator, Trip computer, Differential lock, Engine speed, Automatic transmission indicator, DeClutch indicator, Fuel consumption, Engine diagnostics, Error reporting, Travel speed, Gear selection, Engine mode indicator, Transmission diagnostics, DEF – Diesel Exhaust Fluid gauge, Diff lock* Audible/Visual alarms:
- Warning lights: Four-way flashers and turn signals Brake pressure, Lamp/high beam indication ,Grid heater* NOTE: *If equipped w/ option
- Caution alarm
- Critical alarm
- Backup alarm
- NOTE: *If equipped w/ option
Engine
- FPT F4HFE413T
- Tier 4 Final Certified
- Selectable work modes: Maximum power, Auto power, Standard power, Economy power
- Turbocharger
- Charge air cooling
- Automatic fan belt tensioner
- Integral engine oil cooling
- Fuel filter with water trap
- Dual-element air cleaner
- Hydraulic-driven cooling fan
- Air-cooled radiator
- Mid-mounted cooling module
- Common rail electronic fuel injection
Drivetrain
- 4-wheel drive
- 4F/3R Selectable autoshift/manual shift transmission
- Electronic Control Module – programmable, computer controlled proportional shifting with programmable gear selection
- Onboard diagnostics
- Single lever electronic shift control
- F/N/R switch in loader control handle
- Downshift button
- Torque converter
- Limited-slip differentials – Z-Bar
- Heavy-duty axles – XT/XR: with auto-locking front differential, rear conventional differential and with bronze sintered brake pads
- Outboard planetary axles
- Transmission oil cooler
- Brake pedal transmission disconnect – declutch
- Hydraulic wet disc brakes
- Spring-applied hydraulic release parking brake
- Limp-Home Mode
- Greasable rear axle trunnion
- 3-piece rims
Loader
- Z-Bar loader linkage
- Single control for lift and tilt
- Positive hold float
- Automatic return-to-dig
- Automatic height control
- Automatic return-to-travel
- Brake pedal transmission disconnect
- Bucket position indicator on bucket
Hydraulics
- 2-function loader valve with joystick control
- Low-effort steering
- Hydraulic driven cooling fan
- Diagnostic quick couplers
- Split flange hydraulic connections – 1 in or greater
Electrical
- Alternator and voltage regulator
- Electrical disconnect
- 120 amp alternator
- (2) 700 CCA 12-volt batteries
- Lights: 2 Front driving headlights – high/low beam, 2 Front flood, 2 LED stop and tail lights * 2 Rear flood, Front and rear turn signal/flash
- Key start/stop switch
- Backup alarm
- Centrally located fuse box with all electrical circuits protected
- Remote jump start receptacle
Other
- Electric hood lift
- Front and rear fenders, partial coverage
- Heavy counterweight
- Drawbar hitch
- Articulation locking bar
- Lift arm locking bar
- Lift and tie-down points – front/rear
- Remote drain points
- Grouped remote-mounted ecology drains:
- Engine oil
- Engine coolant
- Hydraulic oil
Telematics
- CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription
CASE 721F OPTIONAL EQUIPMENT
Operator Environment
- Heated cloth-covered air suspension seat
- Cloth mechanical suspension seat
- Headrest
- 3 in (76 mm) retractable seat belt
- Sound Shield noise suppression package
- Cab with heater only – no AC
- Radio-ready – 12 or 24-volt with auxiliary power – 12-volt
- AM/FM stereo radio
- Cab convenience package: ashtray, 24V cigar lighter and cell phone holder
- Rotating beacon
- Right hand brake pedal
- External rearview mirrors
- External rearview mirrors, heated
- In-cab accessory mount – no rear view camera
- Rear view camera with accessory mount
- Extra front-facing work lights
Drivetrain
- 5F/3R Autoshift/manual shift transmission, lockup torque converter, PowerInch de-clutch
- Heavy-duty axles – Z-Bar: with auto-locking front differential, rear conventional differential and with bronze sintered brake pads
- Cold weather package:
- Heavy-duty (2) 950 CCA 12V batteries
- Grid heater
- Fuel heater
- Hydraulic oil cooler bypass
- Low temperature hydraulic oil
- Fast-warm hydraulic valve
Hydraulics
- Auxiliary hydraulics
- Ride Control
- Secondary steering
- Joystick steering with and without secondary steering
- 2-function loader valve with single access control
- 3-function loader valve with 3 lever control or with joystick plus lever
Loader
- XR extended reach version
- XT tool carrier version
- Attachment auxiliary hydraulics
- Coupler systems – JRB or ACS compatible
- Buckets – see pages 4 through 8
- 4 – 1 clamp buckets
- Forks
Advanced Engnie Air Filtration
- Heavy Debris cooling system:
- Slanted cooling module cover
- Auto reversing fan
- Sy-Klone® ejective air pre-cleaner
- Increased cooling fin spacing
- Added cooling module sealing
- Variable speed hydraulic reversing fan
- Full view air pre-cleaner
- Sy-Klone® ejective air pre-cleaner
Tires
- 20.5-25 16 PR L2 bias – dirt/traction
- 20.5-25 16 PR L3 bias – rock
- 20.5 R25 L2 radial – dirt/traction
- 20.5 R25 L3 radial – rock
- 20.5 R25 radial Michelin SnoPlus
- 20.5 R25 radial Bridgestone Snow Wedge
- SolidFlex HD solid tires on adapter rims
- Spare wheels and tires
- Axle oscillation stops
Other
- Additional RH steps and platform with standard or wide fenders
- Side guards for rear frame
- Tool box – ground level access
- Light counterweight – Z-Bar
- Fire extinguisher
- License plate bracket
- 12.4 mph (20 kph) maximum speed control
- Special paint
Guarding
- Skid plate, transmission and front chassis bottom guards
- Windscreen guard
- Specialized guarding package: Windscreen, Articulation, Front cover, Chassis bottom, Skid plate, Transmission, Lift cylinder, Front lights, Fuel tank, Metal wrapped hoses,Cylinder debris ejectors
INTERESTED IN LEARNING MORE ABOUT THE CASE 721F?
Our experienced staff are ready to discuss your new equipment needs. Reach out below to discuss a quote request!